Cart 0
1

STRIP-N-STICK 100S 1/4 THK x 1 1/2" WD x 5 YD

$ 70.00

Strip-N-Stick(SNS) silicone tapes provide all of the benefits of our silicone rubber in an easy-to-apply, pressure-sensitive adhesive tape form.

Compressible and flexible, SNS tapes can conform to irregular surfaces. SNS products are often referred to as instant gasket, simply unwind material off the roll, strip the release liner and stick into place. Saint-Gobain Performance Plastics offers both high and low temperature silicone adhesive and aggressive, strong anchorage acrylic pressure-sensitive adhesive on one side. SNS products can be supplied with closed cell sponge backing (SNS 100S, SNS 200A), fibreglass-reinforced closed cell sponge (SNS 300AR), soft and thin solid silicone (SNS 440S, SNS 440A) or flame retardant foam backing (SNS 512AF).

Product Range

  • 100S - general purpose closed cell sponge with silicone pressure-sensitive adhesive in thicknesses from 1/16 - 1/4 (1.59 mm -6.35mm)
  • 200A - purpose closed cell sponge with acrylic pressure-sensitive adhesive in thicknesses from 1/16 - 1/4 (1.59 mm -6.35mm)
  • 300AR -fiberglass-supported closed cell sponge with aggressive acrylic pressure-sensitive adhesive in thicknesses from 1/16 to 3/16 (1.59mm to 3.18mm)
  • 440S -soft conformable solid silicone rubber, Shore A 30 durometer with high temperature silicone pressure-sensitive adhesive; offered in 1 thickness 1/32 (0.79mm)
  • 440A - soft conformable solid silicone rubber Shore A 30 durometer with aggressive acrylic pressure-sensitive adhesive; offered in 1 thickness 1/32 (0.79mm)
  • 512AF - soft conformable flame retardant silicone foam backing with film- supported aggressive acrylic pressure-sensitive adhesive in thicknesses from 1/16 to 1/2 (1.59mm to 12.7mm)

Features & Benefits

  • Provided in roll form; eliminates the need to die-cut a part
  • Conforms to irregular shapes for cushioning and gasketing multiple height materials
  • Silicone adhesive withstands temperatures ranging from -100F to +500F (-73C to +260C); sticks to low surface energy (LSE) surfaces and is repositionable
  • Acrylic adhesive withstands temperatures ranging from -20F to +350F (-29C to +177C) adhesive is aggressive, permanent and solvent resistant
  • Low compression set for reliability
  • Weather resistant for indoor and outdoor use
  • UV and ozone resistant for extended service life in outdoor applications
  • Fungus resistant; will not support fungus growth

Applications

  • Outdoor light gasketing
  • Electronic packaging weather gasketing
  • Flame retardant insulation used in transportation
  • Light weight gasketing for aerospace
  • Vibration damping in equipment
  • Gap filling applications
  • Thermal insulation

Share this Product